A Cybertruck, fully transformed in matte gray
This Tesla Cybertruck came through the Fraser shop for a full transformation: a matte gray color-change paint protection film, laid over every panel of that bare stainless-steel exterior. New look, head to tail, with a layer of real protection built into it.
We used Pure PPF's matte gray color-change film for this one, a true PPF with a finish, not a wrap, so the Cybertruck gets a custom color and an armor layer in a single install.

Why color-change PPF makes sense on a Cybertruck
The Cybertruck is unusual: no paint, no clear coat, just raw stainless steel. That looks tough, but bare stainless shows fingerprints, fine scratches, and road grime, and it's a pain to keep clean. Color-change PPF solves both problems at once. You get a custom matte finish on the outside and a protective layer over the steel underneath, instead of choosing between looks and protection.
The film's hydrophobic surface sheds water, dirt, and road grime, so washing gets easier and less of it sticks in the first place. The self-healing top layer lets light scratches and swirl marks from everyday use fade out with heat, and the whole thing shields the stainless from scratches, stains, and road debris. Best of all, it's fully removable, so when it's time for a new look, the film comes off and the Cybertruck goes back to factory stainless.
Our color-change process on this Cybertruck, step by step
A full color change lives in the prep, the pattern work, and the edges. The two images we've provided (above and below), showcase that the Cybertruck's big flat panels and sharp angles, leave no room for a mistake to hide. Here's how this one came together.
Inspection and panel map
We went over the stainless panel by panel, noting any existing marks and mapping how the film would break across the Cybertruck's large flat surfaces and sharp body lines. On a full color change, planning where seams fall and where edges tuck is what keeps the finished look seamless.
Deep clean and decontamination
Every panel washed, decontaminated, and wiped down to pull off oils, fingerprints, and road film. Stainless has to be surgically clean before film touches it, because anything left on the surface gets sealed under the color change and shows through the matte finish for good.
Precision cutting and film application
Patterns were cut to the Cybertruck's exact panels, then applied with slip solution and squeegeed from the center out across those wide, flat expanses. Big panels are unforgiving: any trapped air or misalignment reads instantly on a matte surface, so each one gets worked slowly and evenly until it lays dead flat.
Edge wrapping and seam work
The Cybertruck's angular panel gaps and razor-straight creases are where a color change is won or lost. Every edge is wrapped and tucked into the gaps where it can be, and sealed down tight where it can't, so there's no lip on the surface to catch dirt or lift, and the color looks like it belongs to the truck.
Heat-set, cure, and final inspection
Edges and high-stretch areas were heat-set to lock them in, then the whole truck went under light panel by panel, checking for lift lines, bubbles, or contamination. Once it cured, it was ready to roll out in its new matte gray.
How this Cybertruck turned out
A complete head-to-tail transformation in matte gray, with the bare stainless now sitting under a hydrophobic, self-healing layer that shrugs off water, grime, and the light scratches of everyday use. The look is custom, the maintenance is easier, and because it's PPF and not paint, it's fully removable whenever it's time for something new.

Looking for a color change and paint protection?
Color-change PPF is the rare upgrade that does two jobs at once: a completely new look and a real protective layer, with none of it permanent. Whether it's a Cybertruck, a daily driver, or a weekend car, come by the Fraser shop and we'll walk through finishes and coverage with you.
Drivers make the short trip from Roseville, Warren, Sterling Heights, and Clinton Township for exactly this kind of work.
